Information on the Midland Alan Plus
Multi is a bit scarce at the moment and
people arent forthcoming with the
adaption information. Below is what I
have at the moment. Please check
back for updates soon.
|RV202 TX Signal Meter >>>
|RV101 RX Signal Meter >>>
<<<RV201 AM MOD
|<<< CT 401 REF. OSCILLATOR
|To adapt this radio simply make 2 solder connections as shown on the processor tracks below. Click on pics to enlarge
|When the adaption is done press AM/FM and SCAN buttons in and turn on radio. You will have the selection choice by turning the channel selector to ;
I, I2, D, D2, EU, EC, E, F, PL, PX, RU, SW, UK.
The most popular is RU. Turn the channel selector to RU then press AM/FM and thats it... your radio is a 400ch AM/FM set covering 3 low (25.615MHz)
to 6 high (30.105MHz). To change the radio back just turn off the rig, press in and hold AM/FM and SCAN and turn radio back on. Channel selector
turned to UK and press AM/FM and your back to the UK... easy....
CLICK HERE FOR A 4 LOW TO 6 HIGH FREQUENCY CHART
Right click on link with mouse then left click "save target as"